RFQ

Request a Quote

Four steps. Every field exists to size one machine — which is why we ask for it before we can quote. If you don't know a value, leave it blank and we will ask on first contact.

Why we ask for process data — hydrometallurgical equipment sizing is highly sensitive to throughput and medium. A quotation built on an unstated assumption is worthless, so anything we cannot confirm we mark as assuming …, please confirm rather than presenting it as fact.
Contact
Requirements
Process data
Details & send
Request a Quote
Step 1 of 4 — four steps, about 90 seconds. Every field we ask exists to size one machine.
Required
Required
Required
Required
We reply within 2 hours for urgent enquiries during Asia–Europe overlap. Your details stay with our engineering team — no resale, no mass mailing.
What are you processing?
Step 2 of 4 — these six answers decide the flowsheet route. Nothing else can substitute for them.
Selected: —
oxide, sulphide, black mass, concentrate, brine…
Required
Required
e.g. 50 kg/batch, 2 t/day, 20 L/h
Required
Required
Required
Required
Process conditions
Step 3 of 4 — the more you can tell us, the closer our first reply is to a real quotation.
Required
Typical lab slurries run 15–25%
Required
Required
⚠️ Pressure leaching must not be assumed atmospheric
Required
Required
Required
Flowsheet, constraints, target date, anything else useful
Required
Segment-specific data & attachments
Step 4 of 4 — this block changes with the segment you picked. Blank answers are fine; wrong assumptions are not.
Click or drop files here PDF · DOCX · XLSX · DWG · DXF · STEP · PNG · JPG · ZIP — max 5 MB per file, 10 MB in total, up to 5 files
    Required

    By sending this form you agree to our Privacy Policy. We use analytics only after you accept the cookie notice — you can decline and still submit the form.

    Tell us your flowsheet. We size the equipment.

    Share feed material, throughput and medium — our engineers reply with a preliminary configuration and a real quotation.

    Request a Quote sales@lexin-hydromet.com